AEM # 21-796C is a performance intake for the 2015-2016 Hyundai Genesis 3.8L V6 yielding an increase of +19 horsepower and +19 lb-ft of torque on the chassis dyno. The AEM 21-796C intake system replaces the restrictive air box with an oversized AEM DryFlow synthetic air filter, surrounded by a special heat shield that seals against the underside of the hood when it's closed. This creates a veritable cold air chamber, and allows the AEM filter to collect a large volume of cold air coming up from beneath the car, without ingesting any of the warm air from inside the engine bay. That oxygen-rich cold air then travels directly to the engine through a wide diameter AEM intake tube, that's made from powder-coated aluminum, then mandrel bent to provide a turbulence-free airflow path. In addition, there are fittings for all of the factory sensors, so the ECU programming will not be affected.
The AEM air intake # 21-781DS fits 2013-2016 Mercedes Benz CLA250 2.0L yielding +10 horsepower. This air intake system was designed, tuned and dyno-tested to fit. Air enters the system from the factory fresh air inlets, through replacement air ducts and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.