Order by phone 1-888-401-1362

Performance Parts for the 2013+ Scion FR-S Toyota GT86 Subaru BRZ: Headers, Cat Back, Supercharger, Air Intakes, Clutch, Suspension, Caster/Camber Plates, Gauges

  

 Shop AFE  Marken Performance 1-888-401-1362

    Afe is now making twisted steel headers for the 2013-2015 Scion FR-S Subaru BRZ Toyota GT86 with the H4-2.0L engine. Reserve yours today thru Marken Performance.  Part # 48-36005-HC has a 200 CPSI, 48-state legal catalytic converter.  If you don’t want a catalytic converter this is available as part # 48-36005-HN
   Made of 1-5/8" 16-gauge 304 stainless steel equal tube lengths while incorporating a 4-to-1 formed collector with OEM O2 sensors. 
   These headers produced +10 horsepower and +13 ft. lbs. of torque. 
   The smooth curves and increased diameter of this header helps remove restriction and keeps exhaust gas flowing smoothly for improved performance and response. 
   
       DYNO Sheet 
  

  
   Hooker BlackHeart now has complete exhaust for the 2013-2016 Scion FR-S/Subaru BRZ 2.0L. 1 5/8” Headers part # 70304302-RHKR is street version with cats and part # 70304301-RHKR has no cats.
   Mid pipes are available with # 70504305-RHKR or without # 70504304-RHKR resonator thru Hooker Blackheart.
   2.5” cat back’s via Hooker Blackheart are available in single output (with # 70504302-RHKR or without muffler # 70504303-RHKR) and dual output with mufflers # 70504301-RHKR.
  
   You are going to want an updated exhaust when you install the   Edelbrock E-Force BRZ/FR-S Supercharger Video
  

 

Edelbrock’s all-new E-Force Supercharger system, part # 1556, is designed exclusively for the FA20/4U-GSE 2.0L Boxer equipped 2012-15 Scion FR-S, Subaru BRZ, or Toyota GT86 engine. On the Dyno this produces 242 HP & 186 TQ both @ rear wheels—an increase of approx +77 HP and +57 TQ @ wheels. It's unique inverted design features long runners that allow for maximum flow at high rpm, while retaining great daily driving characteristics. To cool the incoming air, is a large dual pass air-to-water intercooler and heat exchanger. All of these features help the E-Force deliver dramatically improved performance, especially in the mid-range, where power dips have been eliminated for a smooth linear power curve. Lastly, the supercharger assembly is finished with a durable black powder coating with red accents for a unique look that will let everybody know your car is E-Force powered!

 
  

  

 

    AFE part # 49-36023-P is a 304SS cat-back w/polished tips for the 2013-15 Scion FR-S/Subaru BRZ 2.0L.  Constructed from 2-1/2" 100% TIG-welded mandrel-bent, brushed finish, 304 stainless steel tubing.  This exhaust system in testing, produced a max gain of +5 horsepower and +6 ft. lbs. of torque verified by our in house dyno.  This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. To finish off this exhaust are two 4.75" oval double wall 304 polished stainless steel tips. This exhaust design uses all factory hanger locations for a hassle free installation.

  
  
  
  
  

  

 

   AFE Takeda Pro 5R Stage-2 Carbon Fiber Intake System part # TM-2013C-R fits: Scion FR-S; Subaru BRZ; Toyota GT86 2.0L Boxer.  +10 HP, +7 lbs x ft Torque max gains. Outflows factory intake by 64%.

   Lightweight high gloss clear-coated 2 x 2 twill weave carbon fiber tube and housing are shaped to maintain factory fit and function while reducing weight and enhancing the visual appearance of the engine bay.

   This intake system utilizes a pre-oiled, large 8-1/2" tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing  maximum airflow and performance.

   Also available with a dry filter, part # TM-2013C-D.

  
  
  

  

 

   The K&N # 69-8619TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system that fits 2013-2015 Scion FR-S/Subaru BRZ 2.0L. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow.  The 69-8619TS air intake comes with a chrome topped K&N high-flow air filter and a heat shield with insulation strips that seals to the hood and installs into the previous air box space.  Yields +7 HP and + 5 TQ.  The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose.  The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions.

  


  

 
   Centerforce also has a new dual friction beefier clutch part # DF834749 for 2013-2015 Scion FR-S & Subaru BRZ 2.0L 4 cylinder engines!   This Dual Friction Clutch set is 2 lbs lighter than stock, increases clamp load by 32% and holds up to 300 ft lb of torque. The disc features a full facing on the pressure plate side for longevity and a carbon composite segmented facing on the flywheel side for increased holding capacity. The flywheel is Billet Steel and SFI approved offering superior quality over the stock cast iron flywheel. Dual Friction is the ultimate in street/strip performance without sacrificing pedal effort and driver control.
   Includes: pressure plate, disc, flywheel, dowel pins, throw out bearing, alignment tool, pilot bearing and pressure plate bolts.

  

  

  

  

  

  
 
   Exedy Racing Flywheel part # FF503 is lightweight racing flywheel made from one piece billet chromoly steel weighing 12.7 lb.  It fits Scion FRS, Subaru BRZ 2.0L Boxer engines.  Reduces weight for better engine response.  Enhances airflow which improves cooling of clutch.  Ring gear teeth integrated onto flywheel.  
   Exedy Racing also has different levels of clutches available for your specific needs.  
  
   
  
  
  
  
  
  
  
  
  

  
 
    The Hotchkis Stage 1 Total Vehicle System part # 80445-1 for the 2013+ Scion FRS and Subaru BRZ offers a sleek lowered stance, dramatically improved handling and superior driver control thanks to a lower center of gravity and improved sway bar rates.  The 1” lowered sport springs are designed to offer a mild drop, improving the stance of the car while maintaining an adequate amount of suspension travel.  The sport sway bars feature a lightweight 25.4mm 2-way adjustable front bar designed in conjunction with a 19mm 4-way adjustable blade style rear bar.  Both bars feature a durable powder coated finish, greasable bushings, mounts and PTFE lined, high articulation heim-joint end links for the rear.  All hardware and detailed installation instructions are included.  The Hotchkis Stage 1 Total Vehicle System offers the FT86 platform, a balanced feel with enough tuning combinations to dial in street or competition driven vehicles.  As with all Hotchkis products, the system is made in the USA and offers a limited lifetime warranty.
    The sway bars are available without the coil springs as kit part # 22445
  
Sport Coil Springs
  • 1” Lowered Stance Designed to be compatible with factory shocks and struts
  • Higher Performance Rates, Front 185lbs/in, Rear 265 lbs/in
  • Cold wound high tensile steel for strength and durable powder coat finish.

 Sway Bars

  • 1” (25.4mm) Tubular 2-Way Adj. Front Sway Bar,
  • ¾” (19mm) 4-Way Adj. Blade Style Rear Sway Bar Includes High Articulation End Links
  • Includes Greasable Polyurethane Bushings and Brackets
  • Durable powder coat finish.
  
  
 
   The factory end links on the 2013 Scion FRS and Subaru BRZ are acceptable for the factory sway bars, but once bars have been upgraded or the car has been lowered, they are no longer sufficient. Hotchkis Sport Suspension offers a high quality, OEM quality, adjustable link for the front of your FT86 car. Part # 25445F links feature THK resin ball-stud links that feature OEM quality construction, increased strength, and a waterproof seal for years of use.  The links are adjustable via CNC machined center sections that feature machine flats, and left/right hand threads for easy adjustment. Don’t risk breaking your factory end links, and upgrade today.
  
 Features:
  • THK resin ball studs
  • Waterproof, protective seals
  • CNC Machined Center Sections with wrench flats
  • Left and right hand threads
  • Durable black zinc coated
  • Direct bolt on replacement.
  • Adjustable 240MM to 260MM
  
    Hotchkis Sport Suspension part # 30445 is Front Caster/Camber Plates for Scion FRS/ Subaru BRZ allow for more adjustment than stock mounts allowing for more alignment options.  These plates are precision CNC machined from 6061 T6 aluminum and feature type 3 hard anodized finish for years of durability and performance.  Each plate is loaded with a high quality PTFE lined bearing and is designed for easy service.  The plates do not change vehicle ride height and are designed to adjust up to -3 degrees of camber when using the included strut bolts. Caster has been increased on this plate by +1 degree from stock. Camber plates are a must for any track car or owner looking to gain the extra edge of performance.  Features: CNC machined 6061 T6 1.5 x 3/4” billet aluminum construction tig welded construction type 3 hard anodized finish ptfe lined spherical bearings direct bolt in installation no modifications required does not change ride height -3 degrees camber possible with included OEM quality camber bolts +1 degrees of added caster.
  

  
   Energy Suspension now has proven Hyper-Flex polyurethane bushing components that reduce wheel hop and sharpens steering response on the street or the track for the 2013 and up Scion FR-S/ Subaru BRZ.  Replace software with firmware!
   Available Fall 2015 : Hyper-Flex System Master Set. 
  
   •  Front Lower Control Arm Bushing PN 8.3131
   •  Rear Control Arm Bushing Set PN 8.3130
   •  Front Sway Bar Bushing Set PN 8.5138
   •  Rear Sway Bar & End Link Bushing Set PN 8.5139
   •  Rack & Pinion Bushings PN 8.10105
   •  Manual Shifter Mount Bushing PN 8.1105
   •  Add R for red or G for black polyurethane
  
  

  
  
   Autometer Direct Fit Dash Pod part # 5285 fits Scion FRS/Subaru BRZ.  This pod uses 2 1/16” Gauges.  This is a great complement to the supercharger as you can put boost and air/fuel ratio gauges in here as well as fuel pressure.

  

   Suggested 2 1/16" gauges thru AutoMeter shown below, click on your fav for more info, opens in a new tab

  

  

  

  

  

  
  
  

 

               

                    2 1/16 "  Gauges  

           

 

  

   For Brakes, please call Marken Performance @ 1-888-401-1362 as there are many variations.

  
  • Posted on   04/13/15 at 12:10:00 AM   by Me  | 
  • RSS
  • |
  • More
Posted in News

Reader Comments (0)

Comment Post Comment

Join Our Newsletter