Shop TransDapt Marken Performance 1-888-401-1362
S10/S15 V8 "Engine Swap In A Box" kits available thru Marken Performance are created using quality products manufactured by Hedman, Trans-Dapt and Hamburger's Performance.
Hedman Hedders provided a 1 1/2 inch shorty header designed specifically for the S10, eliminating clearance and fitment issues while maximizing power and efficiency. Trans Dapt motor mounts and pads are also included in the kit and were developed alongside the headers to ensure proper fitment. An all new 7-quart oil pan from Hamburger’s Performance Products designed specifically for the one-piece rear main seal engines is also included in the kit and is still able to clear the S10’s front cross-member even with its increased capacity. The updated oil pan also features an integrated crankshaft scraper, windage tray and trap door baffles ensuring the new engine receives a steady flow of engine oil, even under harsh competition conditions.
Two Wheel Drive S10/V8 Swap-in-a-Box kits are available for 1986 – 2000 one-piece rear main seal Chevy small blocks with factory, angle plug, or D-port heads, while 4WD kits are available for factory heads only. Each “Swap-In-A-Box” kit offers you the option of Hedman’s standard-duty uncoated, standard-duty ceramic coated, or ELITE heavy-duty headers, all of which feature an integrated ball-and-socket flange on the collector to provide a durable, gasket-free seal. All mounting hardware, gaskets and installation instructions are also included with the kit.
Stuffing a SB Chevy V8 motor into an S10/S15, Blazer/Jimmy, or Sonoma is a complex yet rewarding project. Now, this popular package has been made even better with the addition of applications for the 1986 – 2000 GM small block engine models.
All Kits contain the same Motor Mounts and Oil Pan. The difference between the kits listed is the Hedder. Choose between Elite Ultra-Duty, HTC Coated, Uncoated, D-port & Angle Plug Hedder Model Kits.
Part # 44061: Standard-Duty UNCOATED Hedders- FACTORY Heads, 4WD
Part # 44062: Standard-Duty HTC COATED Hedders- FACTORY Heads, 4WD
Part # 99061: Standard-Duty UNCOATED Hedders- FACTORY Heads, 2WD
Part # 99063: Standard-Duty UNCOATED Hedders- D-PORT Heads, 2WD
Part # 99064: Standard-Duty HTC COATED Hedders- FACTORY Heads, 2WD
Part # 99065: Standard-Duty HTC COATED Hedders- ANGLE PLUG Heads, 2WD
Part # 99066: Standard-Duty HTC COATED Hedders- D-PORT Heads, 2WD
Part # 99067: Ultra-Duty ELITE Model Hedders- FACTORY Heads, 2WD
News
Industry News
Loading
You must login to post comments.