Order by phone 1-888-401-1362

Scroll Down for Edelbrock Cylinder Head, Supercharger

  

Shop Flowtech    Marken Performance 1-888-401-1362

Flowtech Announces Headers for Jeep Wrangler JK (part # 92004-1FLT, 92004FLT) and Jeep Cherokee XJ (part # 92001-1FLT, 92001FLT) with 1 5/8" primaries via Marken Performance.  This Header is a great complement to Edelbrock's new cylinder head for the 4.0L Jeep (listed below)
  
   
   
    Flowtech part # 92001-1FLT ceramic coated shorty headers fits 91-99 Jeep Cherokee XJ 4WD I6-4.0L, tube size 1-5/8" O.D., 2-1/2 inch collector.  Also available in black part # 92001FLT
  
• Tri-Y design for a broad torque curve and increased torque. Perfect for off-road and rock crawling
• High flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity
• Heavy duty tubing and high quality welds for increased strength and durability
• Smooth transition, 1-5/8” diameter primary tubes are used for increased exhaust flow increasing performance, improving throttle response and broadening the torque curve
• Machined 3/8” header flange welded inside and out for a leak-free seal and maximum strength
• Premium aluminum header gaskets and installation hardware included  
   
   
  
  
 
   
 
  
   Flowtech part # 92004-1FLT ceramic coated shorty headers fits 07-11 Jeep Wrangler JK 2WD/4WD V6-3.8L, tube size 1-5/8" O.D., OE style 2-1/2” ball and socket collector connects to factory exhaust head pipe with no cutting or welding.  Also available in black part # 92004FLT.
  
• Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity
• Heavy duty 16-gauge tubing for increased strength and durability
• Smooth transition, 1-5/8” diameter primary tubes are used for increased exhaust flow increasing performance and improving throttle response
• OE style 2-1/2” ball and socket collector connects to factory exhaust head pipe with no cutting or welding
• TIG-welded, machined 3/8” header flange for a leak-free seal and maximum strength
• Accommodates all factory OE components. C.A.R.B. EO Pending
• Premium aluminum header gaskets included
   

  

 Edelbrock Info Page  Marken Performance 1-888-401-1362 

   Edelbrock new Performer cylinder head (part # 50169) is designed as a bolt-on performance upgrade for 1991-2006 Jeep's with a 4.0L in-line 6 cylinder engine.  Can also be used on 1987-90 Jeep engines and AMC 4.2L engines as long as the 1991-2006 Jeep intakes/exhaust manifolds are used.  EO # pending.  These long heads are now possible due to the upgrades @ Edelbrock factory.  Reserve yours now thru Marken Performance as these will be a hot item, available in April.  
   
   Video  
  
 
  
  

  Shop Edelbrock      Shop E-Force        Main Supercharger Article

  
   
    Edelbrock now has E-Force Supercharger part #1527 (with tuner) for the 2012-14 Jeep Wrangler 3.6L V6 owners. Kit includes everything needed to bolt on and go, from the intercooler to the plumbing and hardware.  Carb EO# Pending.   Uses Eaton TVS 1320 Supercharger.  They have designed the supercharger around the oil filter located at the top, which means no special oil filter needed.  It does all fit under the hood! In dyno tests E-Force system #1527 increased performance to 317 hp and 277 ft-lbs. of torque, an increase of 90 hp and 73 ft-lbs. to the rear wheels! Need it installed--Marken Performance has installed E-Force superchargers already! The new E-Force Limited Powertrain Warranty will cover engine, transmission and rear axle components for 3 years/36,000 miles with $16,500 in coverage at no additional cost.

    Video 
  

Comment Post Comment

Join Our Newsletter