AFE Power has the Intake and Exhaust parts to bring your 2015-16 Ford Mustang Ecoboost 2.3L to the next level with big power gains. To go above and beyond ask Marken Performance for a custom tune and ask them for a package price with all 4 of the parts below.

  

    AFE part # 48-33017-HC is a 3” Twisted Steel "Street" Down-Pipe for the 2015-16 Ford Mustang EcoBoost 2.3L (t).  This upgraded street version includes 400 CPSI (cell per square inch) 48-state legal catalytic converter for maximum flow.  It is constructed of 3" durable mandrel bent brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.  It also includes a second bung for either a wide-band O₂ gauge or auxiliary instrumentation which can be ordered and installed thru Marken Performance.  In testing, the "street" down-pipe produced a max gain of +13 horsepower and +15 ft. lbs. of torque verified by our in house dyno (tested on 2015 Ford Mustang 2.3L (t)).   Connection Pipes have 2 alternatives:  1)  3" inlet/2-1/4" outlet connection pipes mount directly to OE mounting locations OR 2) 3" inlet/3" outlet connection pipes mount directly to the aFe cat back exhaust (part # 49-33084) for even more flow. 

    AFE part # 49-33084-B is a 3” cat back for the 2015-16 Ford Mustang EcoBoost I4-2.3L (t) which is a perfect complement for the above down pipe.  The “-B” indicates double wall, gloss black, 304 stainless steel tips with laser etched aFe power logo.  This cat back has 2 4" tips.   This cat back is constructed out of single 3" into dual 2-1/2" mandrel-bent 304 stainless steel tubing for unrestricted flow.  Includes a clamp-on reduction tube to fit stock connections, otherwise the full 3" system fits the aFe Power performance down-pipes (part # 48-33017-HC listed above).  In recent testing, this system produced +16 horsepower and +17 lbs. x ft. of torque on our in house dyno, tested on a 2015 Ford Mustang EcoBoost 2.3L with aFe down pipes # 48-33017-HC. 

  

  

  

    AFE part # 46-20254-B is An upgraded BladeRunner Intercooler Black Hot and Cold Side Tubes w/couplings and clamps.  +33 HP  & +29 lbs. x ft. Torque max gains.  aFe Power's intercooler tubes are constructed from 2-1/2" (Hot Side) and 3" (Cold Side) mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish.  The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion.  Includes premium clamps and silicone couplings for long life, perfect fit and strength.  The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque.  Also included is one 1/8" NPT port on each tube which is provided for a sensor or water-methanol injection. This also has a built-in CNC machined aluminum blow off valve (Cold side).  Uses all factory mounting locations for a hassle-free installation. 

    AFE part # 51-73201 is a cold air intake for the 2015-16 Ford Mustang EcoBoost 2.3L (t).   This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.  3 CNC machined, high quality billet aluminum fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines.  This Pro DRY S air filter has a large 5" flange and is 8" tall with an inverted top.  HP & TQ not listed yet but you bet it will only increase over stock.