AEM air intake # 21-792C is a cold air intake that fits the 2016 Honda Civic 2.0L that can be purchased thru Marken Performance.  AEM # 21-792C yields an extra +7 HP over the stock 158-hp and 138 lb-ft of torque.  The AEM 21-792C system increases the volume of cold air by replacing the stock air box with an oversized AEM DryFlow synthetic air filter, surrounded by a heat shield that seals against the underside of the hood to prevent warm engine air from entering the system. The high-flow AEM air filter removes significantly more dirt from the air than a paper filter, and it won't have to be cleaned for up to 100,000 miles (depending on road conditions).  That clean air then gets channeled to the throttle body through a wide-diameter mandrel bent aluminum AEM intake tube (which has a durable gunmetal gray powder coated finish) to eliminate airflow restrictions and turbulence. The intake tube also has integrated fittings for the mass airflow sensor and crankcase vent tube, so no modifications will be required, and installation will only take about 90 minutes at Marken Performance.