Moroso Air/Oil Separator, Brake Reservoir Cover and Fuse Cover for Coyote
Moroso’s Air Oil Separator part # 85485 simply plumbs into the factory PCV system and can be ordered by calling Marken Performance. A good mounting place is the driver side strut tower on your Coyote for both the length of the hose, and allows easy access to the drain on the separator so you can recycle the captured oil every few weeks.
The Air/Oil separator works by using a specially designed billet filter media to trap the oil present in crankcase gasses as they pass through the PCV system. The gasses are allowed to circulate back into the system to be burned as part of the combustion process, and the oil is trapped in the separator, which can be drained and the oil either returned to the engine or disposed of properly.
Moroso Brake Fluid Reservoir Cover, part # 74222. This piece is constructed from aluminum, and the corners have been TIG welded. It matches the appearance of Moroso’s coolant tanks, giving underhood appearance a race-inspired look.
Installing the brake reservoir cover is as easy as adding brake fluid. Simply remove the cap from the reservoir, and the cover slides over top of it. Put the cap back on the brake reservoir and installation is completed. The cover doesn’t interfere with the brake fluid cap. Fits cars produced 5/27/08 and later.
The OEM underhood power distribution or fuse box lid is pretty pedestrian looking with it’s plain plastic cover. Just like the brake fluid reservoir cover, the Moroso fuse box cover, part # 74228 is fabricated from .100-inch thick aluminum with TIG welded corners. To install the cover simply slips over the factory fuse box lid. Fits 2010+ Mustangs.
News
Industry News
Loading
You must login to post comments.