Edelbrock Info Page Parts thru Marken Performance 1-888-401-1362
New from Edelbrock is the Victor Jr. CNC head for Chrysler 426-572 Hemi engines. Reserve yours today from Marken Performance. This head features CNC combustion chambers and CNC-blended seats for improved airflow. The exhaust valve angle has been revised to allow 2.32-inch intake valves. Intake port volume is 245cc, and brass tubes are installed in the exhaust pushrod holes to allow more clearance without intruding on the port. for high output 650+ hp Chrysler 426-572 engines. These Cylinder heads also feature a revised exhaust valve angle to accommodate larger intake valves. They also feature brass tubes installed in exhaust pushrod holes to allow maximum clearance with minimal port intrusion.
• Victor Jr. CNC cylinder heads # 61175 and # 61179 are complete and ready to run right out of the box.
• Victor Jr. CNC cylinder heads # 61169 are bare and supplied with reamed and semi-finished valve stem guides. They will require finishing on the valve stem guides and a valve job before installation.
• Victor Jr. CNC cylinder heads # 61189 are shipped with reamed and machined valve stem guides, as well as a valve job to match the included intake and exhaust valves (valves not installed). Customer must supply their own valve springs, retainers, valve stem seals and valve locks.
News
Industry News
Loading
You must login to post comments.